|
Step
By Step Instructions
1. Make sure the switch on the
MedicTag is to the LEFT when holding
the MedicTag with the attaching hole
upright. Moving the switch to the
right makes the unit "read only"
preventing accidental changes to
your information.
2. Plug the MedicTag into a USB
port. Your system should recognized
that you have plugged in the
MedicTag and display a new icon in
the task area at the lower right of
your screen. Depending on your
computer system configuration the
MedicTag software menu should be
displayed automatically.
If it is
displayed, go to Step 6. Otherwise
proceed to Step 3.
3. Double click on "My Computer" to
show a list of your drives.
(If you do not have a "My Computer"
icon on your desktop, click on
"Start" then click "My computer")
4. Double click on the "red cross"
icon to access the MedicTag files.
5. Double click the AutoRun.exe icon
to start the program.
6. From the menu click on "View
Emergency Information".
7. Fill in your information as
needed.
8. At the top, right corner of the
form, click on the "X" to close the
form. You will be asked if you would
like to save the changes. Click
"Yes".
9. You can also save a backup copy
of your information to your
computer. Click on "File" and then
"Save As", in the dialog box that
appears, navigate to your desktop
and then click on "Save".
11. In the menu click on "Exit" or
the "X" in the upper right corner to
close.
Removing the MedicTag from your
computer depends on your operating
system and hardware.
On most systems that are "Plug and
Play" you can simply unplug the
MedicTag.
On others you must must turn off the
device by clicking on the device
icon in the task area at the lower
right of your screen and follow the
instructions.
Click
HERE
for Instructions text that you
can print.
Do you still have a question? Use
the
Comments Form
to send your questions, comments or
suggestions to us.
|
